service routine

Design and Optimize the Interrupt Service Routine of ARM7 Embedded System

ARM7嵌入式系统的中断设计与中断处理优化

The DSP control software is roughly divided into main program, timer interrupt service routine and AD conversion interrupt service routine.

DSP控制软件主要分主程序、定时器中断服务程序和AD转换中断服务程序。

A VAX/ VMS interrupt service routine that is activated by a software interrupt at a fork interrupt priority level ( IPL).

VAX/VMS的一种中断服务子程序，在分叉中断优先级（pl）软件中断激活。

Modular construction is adopted in the software system design. It is chiefly composed of main program, interrupt service routine, and several functioning modular subprogram.

软件系统的设计采用模块化结构，主要由主程序、中断服务程序和若干功能模块子程序组成。

It also gives the circuits frame, a boot table building and the design of interrupt service routine in ARM.

文中还给出相关的硬件连接、自举表的建立以及ARM端中断服务程序的设计方法和实例。

The module software is a front and back office system. Namely the front system completes interrupt service routine while the background system completes the task-level program.

模块软件采用前后台系统，即前台完成中断服务程序，后台完成任务级程序。

Advocate battalion property manages and seek advice from service routine.

主营物业管理和咨询服务工作.

The WDM Driver Development through Interrupt Service Routine

中断工作方式下的WDM驱动程序设计

The main program and interrupt service routine ( ISR ) realized by using modularized software design method.

软件采用模块软件设计的方法设计了控制系统主程序、中断 服务程序 及中断服务子程序.

According to structured programming, the software of the lower machine is composed by the main program, the subroutine and interrupt service routine.

按照结构化编程思想，将下位机软件划分为主程序、子程序和中断程序三部分分别进行设计。

The addre of a interrupt service routine.

中断服务程序所在的地址.

Interrupt service routine ( ISR) is the most important peripheral accessing method.

中断是主机与外部设备交互的最重要的方法。

An interrupt service routine for printing Russia symbols

实现俄文扩展字符打印的中断服务程序

River hydrology is paid service routine only then at the beginning of 80 time.

黄河水文有偿服务工作始于80年代初.

Analysis and design of the driving power of the main control program and the interrupt service routine.

分析并设计了驱动电源的主控制程序及中断服务程序。

When the interrupt service routine exits control of the processor is returned to whatever part of the software was previously running.

当中断服务程序退出，对处理器的控制权转到先前运行的那个软件上。

Control system software of upper PC was compiled with VB6.0, system program of the intelligent traffic signal machine was compiled with assemble language, timing interrupt service routine was partitioned into 100ms, 0.5s and 1s program segment.

上位机控制系统软件用VB6.0编程，信号机系统程序用汇编语言编写，其定时中断处理程序分为100ms，0.5s和1s程序段。

The main program and interrupt service routine ( ISR ) are realized by using modularized software design method.

软件采用模块化软件设计的方法设计了控制系统主程序、中断服务程序及中断服务子程序.

Finally, this paper compendiary introduces the designs of hardware interface routine for ARM mic-controller, hardware interface and interrupt service routine for USB communication.

另外本文也简略介绍了ARM微控制器系统硬件接口程序、USB通讯硬件接口和中断服务程序的设计。

This article helps device driver developers test the interrupt service routine as much as possible by simulating the various interrupts.

本文通过模拟各种中断，尽可能地帮助设备驱动程序开发人员测试中断服务例程。

We discuss the software modules of the device, including the main routine and the interrupt service routine.

在硬件设计的基础上，完成了装置各软件模块的设计：包括主程序模块和中断服务子程序模块。

The address of an interrupt service routine.

中断服务程序所在的地址。

Among them, main program is in charge of initialization and key-display processing, timer interrupt service routine, is designed to implement vector control algorithm, three close-loop regulators and the generation of SVPWM signals as core program.

主程序负责初始化和键显处理，定时器中断服务程序作为核心程序实现矢量控制算法、三闭环调节器设计和SVPWM信号发生，AD转换中断服务程序为系统保护功能提供基础之一。

Improvement of Timer Interrupt Service Routine in RTOS

嵌入式实时操作系统中对时钟中断服务程序的改进

Drivers for hardware interrupts will interrupt service routine ( ISR ) and a deferred procedure call ( DPC ) routine .

用户在使用应用程序需将数据和程序 调入 计算机内存.

To recognize the interrupt source and run the corresponding interrupt service routine ( ISR), the program has to check every bit of the interrupt pending register until the interrupt source is found.

为了识别中籽源，进而运行对应的中断服务例程（ISR），程序需读取中断悬挂寄存器，获得中断号。

The main program and interrupt service routine ( ISR) are realized by using modularized software design method.

软件采用模块化软件设计的方法设计了控制系统主程序、中断服务程序及中断服务子程序。

Resident and application of Interrupt Service Routine

中断服务程序的驻留与应用

Sale job is admittedly main, but service routine more not allow laches.

营销工作固然重要, 但服务工作更不容懈怠.

Interrupt service routine in Unix

UNIX中断处理程序的研究